Low maintenance, weather-ready, and built to last decades. Hundreds of styles and colors to match your home's character.
Call for a Free Quote: +1-844-782-0929
Our crews install vinyl every week. That repetition builds genuine skill -- tighter joints, proper expansion gaps, and correct fastener technique that holds up season after season.
Choosing vinyl siding involves more than picking a color. We discuss profile style, panel width, trim coordination, and how different finishes photograph in natural light on your home.
Proper installation technique matters as much as product quality. We cut on score, nail in the center of slots, leave correct overlap, and seat J-channels and trim pieces so the system performs as designed.
We only install products from manufacturers whose warranty terms we stand behind. We walk you through coverage before the project starts so you understand exactly what is protected.
Complete vinyl siding installation on new construction or over-existing cladding. We handle prep, house wrap inspection, and full installation with proper trim, flashing, and accessories.
We remove and properly dispose of existing siding, inspect the substrate for moisture or rot before covering it, and install new vinyl to manufacturer specs. Your home gets a fresh exterior backed by a full warranty.
Insulated vinyl siding incorporates a foam backing that improves thermal performance, adds panel rigidity, and provides a quieter exterior. A strong choice for Minneapolis, MN homes with high energy costs or thin wall assemblies.
We install vinyl shake on full elevations and as accent panels alongside horizontal lap siding. Proper alignment and starter strip placement keep the staggered courses looking intentional, not ragged.
Vertical installation requires different technique than horizontal lap. Expansion allowances run differently, and water management at the top edge demands precise flashing detail. Our crews have the experience to get it right.
Vented soffit keeps your attic breathing while blocking pests. We size vent panels correctly for your attic square footage and install them with the same care as the field siding -- no shortcuts on trim work.
Standard grade vinyl (typically .040" thick) is adequate for mild conditions and budget-conscious projects. Premium grades (.044" and above) hold shape better in temperature extremes common to Minneapolis, MN and resist denting from impact more effectively. We specify grade based on your home's exposure, not upsell pressure.
Thickness is measured in thousandths of an inch (mils or gauge). Thicker panels feel more solid, flex less in wind, and generally carry longer fade warranties. We provide thickness comparisons from the brands we carry so you can make an informed choice.
Insulated vinyl costs more upfront but reduces heating and cooling load, eliminates panel flex noise, and adds perceived quality. For Minneapolis homeowners dealing with significant temperature swings, the energy offset can narrow the price gap over a decade of ownership.
We stock impact-rated options and recommend them for exposed elevations. Manufacturer documentation on impact ratings is available on request -- you should know what you are installing before work begins.
We assess your home, discuss grade and style options, and deliver a written estimate with material and labor broken out. No vague totals, no pressure.
Once you approve the estimate, we finalize your style and color selection using physical samples on your home, then place the material order. Lead times are confirmed before your install date is scheduled.
Installation progresses elevation by elevation, with trim and accessory pieces fitted as we go rather than added at the end. Quality checks happen during the work, not after.
Your sign-off comes only when you are satisfied. We resolve any punch-list items before leaving the site and leave you with a clear record of what was installed and what is covered.
Vinyl siding is manufactured from polyvinyl chloride (PVC) resin compounded with stabilizers, pigments, and impact modifiers. The resulting panels are extruded at consistent thickness, then embossed with surface textures that mimic wood grain, cedar shake, or smooth lap board. Because the color runs through the full thickness of the panel rather than sitting as a surface coat, minor scratches and scuffs do not expose an underlying substrate. This characteristic distinguishes vinyl from painted wood or fiber cement and contributes directly to its maintenance advantage.
The physical behavior of vinyl in Minneapolis, MN's climate is the central installation challenge. PVC expands considerably with temperature increases and contracts in cold. Panels installed on a mild spring day will be in a different dimensional state than the same panels on a July afternoon or a January morning. A professional crew nails into the center of the elongated nail slots so each panel floats freely within the designed tolerance. Driving nails tight -- even one or two per panel -- creates a fixed point around which thermal stress concentrates, producing the waves and buckles homeowners associate with cheap installation. The material itself is not cheap; the technique was.
Vinyl siding grades are measured primarily by panel thickness, expressed in thousandths of an inch. Products at the lower end of the market measure around .040 inches. Premium lines reach .044 to .050 inches or more. Thicker panels carry greater impact resistance, flex less in high winds, and maintain a flatter profile over long spans between studs. They also tend to carry more favorable fade warranties from manufacturers, because the pigment loading in premium grades is formulated for longer color stability under UV exposure. For most standard residential applications in Minneapolis, a mid-range to premium thickness is a reasonable specification. Budget-grade panels are appropriate for low-exposure applications like enclosed porches or garage elevations with minimal sun and wind exposure.
Insulated vinyl is worth serious consideration for Minneapolis homeowners who prioritize energy performance or who have noticed that their existing siding is thin and responsive to wind pressure. The foam backing does not dramatically transform a wall's R-value on its own, but it adds continuous insulation that breaks the thermal bridging through wall framing -- a real improvement over cavity insulation alone. The cost premium is real, and the payback period depends on your energy rates and climate exposure in Minneapolis, MN. We give honest comparisons and let you decide.
Cleaning vinyl siding requires very little effort compared to painted wood. Most surface dirt and mildew washes off with a garden hose and a soft brush. For more stubborn mildew, a diluted solution of white vinegar and water or a vinyl-specific cleaning product removes organic growth without damaging the panel surface. Pressure washers used at low pressure and kept away from panel joints are effective. High-pressure streams directed under the panel laps force water behind the siding and create exactly the moisture infiltration the system is designed to prevent. Cleaning vinyl two to three times per year in Minneapolis, MN keeps it looking fresh without significant time investment, and no repainting is ever required.
Properly installed vinyl in Minneapolis, Minneapolis, MN holds up for a long time when the installation fundamentals are correct. Warranty documents from reputable manufacturers cover decades of product performance. What they do not cover is installation error, which is why workmanship warranty from your contractor matters as much as the product warranty itself. When you invest in a new exterior, the contractor's commitment to their own work is the most meaningful assurance of long-term performance. We back ours in writing.
"We got quotes from four contractors. SOS Roofing and Siding was the only one who brought actual samples to our house so we could see the colors against our trim and roof in real light. That alone told us they knew what they were doing. The installation was flawless."
"The crew upgraded us to insulated vinyl after showing us the cost difference and what it would do for our north-facing wall. Best decision we made on the whole project."
"The old vinyl on our house was bubbling and wavy -- classic bad installation from whoever put it on years ago. SOS Roofing and Siding removed it, found some moisture damage on the sheathing underneath, fixed it before putting new vinyl on, and documented everything. That kind of transparency is rare."
"Crew showed up on time every day, cleaned up every evening, and finished ahead of the original schedule. The soffit and fascia match the siding perfectly. The whole exterior transformation has our neighbors asking who we used."
